Komatsu excavator old model code table PC (-8) model machine fault code

Fault code [989L00] Engine controller lock warning 1

Fault code [989M00] Engine controller lock warning 2

Fault code [989N00] Engine controller lock warning 3

Fault code [AA10NX] Air filter clogged

Fault code [AB00KE] Charging voltage is low

Fault code [B@BAZG] Low oil pressure

Fault code [B@BAZK] Engine oil level is low

Fault code [B@BCNS] Engine cooling water is overheated

Fault code [B@BCZK] Engine cooling water level is low

Fault code [B@HANS] Hydraulic oil overheating

Fault code [CA111] EMC critical internal fault

Fault code [CA115] Engine Ne and Bkup speed sensor failure

Fault code [CA122] High pressure fault of inflation pressure sensor

Fault code [CA123] Inflation pressure sensor low pressure fault

Fault code [CA131] Throttle sensor high voltage fault

Fault code [CA132] Throttle sensor low voltage fault

Fault code [CA144] Coolant temperature sensor high voltage fault

Fault code [CA145] Coolant temperature sensor low pressure fault

Fault code [CA153] Charging temperature sensor high pressure fault

Fault code [CA154] Charging temperature sensor low pressure fault

Fault code [CA155] The charging temperature drops rapidly

Fault code [CA187] Sensor power supply 2 low voltage fault

Fault code [CA221] Environmental pressure sensor high pressure fault

Fault code [CA222] Environmental pressure sensor low pressure fault

Fault code [CA227] Sensor power supply 2 high voltage fault

Fault code [CA234] Engine over speed

Fault code [CA238] Ne speed sensor power supply voltage failure

Fault code [CA271] IMV/PCV1 short circuit fault

Fault code [CA272] IMV/PCV1 open circuit fault

Fault code [CA322] Injector #1 (L#1) open circuit/short circuit fault

Fault code [CA323] Injector #5 (L#5) open circuit/short circuit fault

Fault code [CA324] Injector #3 (L#3) open circuit/short circuit fault

Fault code [CA325] Injector #6 (L#6) open circuit/short circuit fault

Fault code [CA325] Injector #2 (L#2) open circuit/short circuit fault

Fault code [CA325] Injector #4 (L#4) open circuit/short circuit fault

Troubleshooting with fault codes (display codes), Part 2

Fault code [CA342] Calibration code is incompatible

Fault code [CA351] Fuel injector drive circuit fault

Fault code [CA352] Sensor power supply 1 low voltage fault

Fault code [CA386] Sensor power supply 1 voltage high fault

Fault code [CA428] Fuel water sensor high voltage fault

Fault code [CA429] Fuel water sensor low voltage fault

Fault code [CA435] Oil pressure switch failure

Fault code [CA441] battery low voltage fault

Fault code [CA442] High battery voltage fault

Fault code [CA449] Extremely high oil tank pressure fault

Fault code [CA451] Oil tank pressure sensor high voltage fault

Fault code [CA452] Oil tank pressure sensor low voltage fault

Fault code [CA488] The charging temperature is high and the torque is reduced.

Fault code [CA553] High oil tank pressure fault

Fault code [CA559] low oil tank pressure fault

Fault code [CA689] Engine Ne speed sensor failure

Fault code [CA731] Engine Bkup speed sensor phase failure

Fault code [CA757] All continuous data loss fault

Fault code [CA778] Engine Bkup speed sensor failure

Fault code [CA1633] KOMNET data link timeout fault

Fault code [CA2185] Throttle sensor power supply voltage high fault

Fault code [CA2186] Throttle sensor power supply voltage low fault

Fault code [CA2249] Oil tank pressure extremely low fault

Fault code [CA2311] IMV solenoid coil failure

Fault code [CA2555] Grill heater relay high voltage fault

Fault code [CA2556] Grill heater relay low voltage fault

Fault code [D19JKZ] Personnel code relay abnormality

Fault code [D862KA] GPS antenna is broken.

Fault code [DA22KK] Pump solenoid coil power supply voltage is low.

Fault code [DA25KP] 5V sensor 1 power supply voltage abnormality

Fault code [DA29KQ] Abnormal model selection

Diagnose faults based on fault codes (code display)

Fault code [DA2RMC] CAN open circuit (pump controller detects

Fault code [DAFGMC] GPS module fault

Fault code [DAFRMC] CAN open circuit (pump controller detection)

Fault code [DGH2KB] Hydraulic oil temperature sensor short circuit

Fault code [DHPAMA]F Pump pressure sensor abnormality

Fault code [DHPBMA]R Pump pressure sensor abnormality

Fault code [DHS3MA] The stick is retracted and the PPC pressure sensor is abnormal.

Fault code [DHS4MA] Bucket excavation PPC pressure sensor abnormality

Fault code [DHS8MA] Boom lifting PPC pressure sensor abnormality

Fault code [DHSAMA] Right rotation PPC pressure sensor abnormality

Fault code [DHMA] Left rotation PPC pressure sensor abnormality

Fault code [DHSDMA] Bucket unloading PPC pressure sensor abnormality

Fault code [DHX1MA] Overload sensor abnormality (simulation)

Fault code [DW43KA] Travel speed solenoid coil is open circuit

Fault code [DW43KB] Travel speed solenoid coil short circuit

Fault code [DW45KA] Swing brake solenoid coil is open circuit

Fault code [DW45KB] Swing brake solenoid coil short circuit

Fault code [DW91KA] Walking connected electromagnetic coil is open circuit

Fault code [DW91KB] Walking connection electromagnetic coil short circuit

Fault code [DWA2KA] Backup solenoid coil is open circuit

Fault code [DWA2KB] Backup solenoid coil short circuit

Fault code [DWK0KA] Level 2 overflow solenoid coil is open circuit

Fault code [DWK0KB] Level 2 overflow solenoid coil short circuit

Diagnose faults based on fault codes (code display)

Fault code [DXA8KA] PC-EPC (F) electromagnetic coil system open circuit

Fault code [DXA8KB] PC-EPC (F) electromagnetic coil system open circuit

Fault code [DXA9KA] PC-EPC (R) electromagnetic coil system open circuit

Fault code [DXA9KB] PC-EPC(R) electromagnetic coil system short circuit

Fault code [DXE0KA] LS-EPC solenoid system open circuit

Fault code [DXE0KB] LS-EPC solenoid coil short circuit

Fault code [DXE4KA] Standby current EPC solenoid coil open circuit

Fault code [DXE4KB] Standby current EPC solenoid coil short circuit

Fault code [DXE5KA] Merging-diverging main solenoid coil is open circuit

Fault code [DXE5KB] Merging-shunting main solenoid coil short circuit

Fault code [DXE6KA] Combined-shunt LS electromagnetic coil open circuit

Fault code [DXE6KB] Combined-shunt LS solenoid coil short circuit

Fault code [DY20KA] Wiper working abnormally

Fault code [DY20MA] Wiper stops abnormally

Fault code [DY2CKA] Washer drive system open circuit

Fault code [DY2CKB] Scrubber drive system short circuit

Fault code [DY2DKB] Wiper drive system (forward) short circuit

Fault code [DY2EKB] Wiper drive system (reverse) short circuit

Electrical system fault diagnosis (E mode)

Before troubleshooting electrical systems

Troubleshooting table information

E-1 When the start switch is turned to the ON position, there is no display on the machine monitor

E-2 When the starting switch is turned to the ON position (before starting the engine), the basic inspection items flash

E-3 The engine does not start (the engine does not rotate)

E-4 preheater does not work

E-5 Automatic preheating system does not work (in cold season)

E-6 All working devices, slewing and traveling mechanisms do not move or cannot be locked

E-7 Attention light comes on when the engine is running

E-8 The emergency stop item light comes on when the engine is running.

E-9 Engine coolant temperature gauge displays abnormally

E-10 Hydraulic oil temperature gauge displays abnormally

E-11 The fuel level gauge displays abnormally

E-12 The display content of the machine monitor is different from that of the applicable machine.

E-13 Machine monitor does not display some items

E-14 function switch does not work.

E-15 Automatic speed reducer does not work properly

E-16 Working mode does not change

E-17 Walking speed does not change

E-18 The alarm buzzer cannot stop

E-19 Windshield wipers and window washer not working

E-20 Maximum power function does not work properly

E-21 The swing holding brake does not work properly.

E-22 The walking alarm does not sound or stops sounding

E-23 Air conditioner is not working properly (including air conditioner abnormality record)

E-24 When the start switch is in the OFF position, the hour meter does not display

E-25 Machine monitor cannot be set while in service mode

E-26 The monitoring function is abnormal and the joystick control signal is displayed.

E-27 KOMTRAX system not working properly

Troubleshooting of hydraulic and mechanical systems (H mode)

H-1 The speed or power of the entire working device, rotation, and travel is low

H-2 engine speed drops extremely quickly or engine stalls

H-3 working device, rotation, and traveling system do not work

H-4 Abnormal sounds occur around the hydraulic pump

H-5 automatic reducer does not work

H-6 Fine control performance or low response

H-7 Boom speed or power is low

H-8 Stick has low speed or power

H-9 Bucket speed or power is low

H-10 Working equipment does not move alone

H-11 working device has large hydraulic drift

H-12 The time lag of the working device is large

H-13 When parts of the work equipment are individually flooded, other parts of the work equipment move

H-14 Maximum power function does not work

H-15 In the composite operation of the work device, the speed of the component with a large load is low

H-16 When the machine rotates and lifts the boom at the same time, the boom lifting speed is low

H-17 When the machine rotates and walks at the same time, the walking speed is greatly reduced

H-18 Deviation during machine travel

H-19 low walking speed

H-20 The machine has poor steering or low steering force

H-21 Walking speed remains unchanged or walking speed is low/high

H-22 walking system does not move (only one side)

H-23 The upper rotating platform does not rotate

H-24 Rotation acceleration or low rotation speed

H-25 When the upper rotating platform stops rotating, it rotates too much

H-26 When the upper rotating platform stops rotating, a large vibration occurs

H-27 When the upper rotating platform stops rotating, it makes a loud sound

H-28 has large hydraulic drift in rotation

H-30 cannot control the flow in the accessory oil circuit

Engine fault diagnosis (S mode)

S-1 poor starting performance

S-2 engine cannot start

S-3 engine accelerates unevenly

S-4 engine shutdown during operation

S-5 engine does not rotate smoothly

S-6 engine output is insufficient (or insufficient power)

S-7 exhaust smoke is black (incomplete combustion)

S-8 Excessive fuel consumption (or exhaust smoke is blue)

S-9 oil contaminates quickly

S-10 Excessive fuel consumption

S-11 There is oil in the coolant (or the coolant sprays out or the coolant level drops)

S-12 Oil pressure drops

S-13 Engine oil level rises (coolant/fuel enters)

S-14 Coolant temperature becomes too high (overheating)

S-15 makes unusual noises

S-16 Excessive vibration

PC (8MO) eight-MO machine fault code table

Fault code [879AKA] A/C internal sensor open circuit

Fault code [879AKB] A/C internal sensor short circuit

Fault code [879BKA] A/C external sensor open circuit

Fault code [879BKB] A/C external sensor short circuit

Fault code [879CKA] Ventilation sensor open circuit

Fault code [879CKB] Ventilation sensor short circuit

Fault code [879DKZ] Sunlight sensor open or short circuit

Fault code [879EMC] Abnormal ventilation damper

Fault code [879FMC] Air mixture damper abnormality

Fault code [879GKX] Refrigerant abnormality

Fault code [989L00] Engine controller lock warning 1

Fault code [989M00] Engine controller lock warning 2

Fault code [989N00] Engine controller lock warning 3

Fault code [AA10NX] Air filter clogged

Fault code [AB00KE] Charging voltage is low

Fault code [B@BAZG] Low oil pressure

Fault code [B@BAZK] Engine oil level is low

Fault code [B@BCNS] Engine cooling water is overheated

Fault code [B@BCZK] Radiator coolant level is low

Fault code [B@HANS] Hydraulic oil overheating

Fault code [CA111] ECM critical internal fault

Fault code [CA115] Engine Ne and Bkup speed sensor failure

Fault code [CA122] Boost pressure sensor high pressure fault

Fault code [CA123] Boost pressure sensor low pressure fault

Fault code [CA131] Throttle sensor high voltage fault

Fault code [CA132] Throttle sensor low voltage fault

Fault code [CA144] Coolant temperature sensor high voltage fault

Fault code [CA145] Coolant temperature sensor low pressure fault

Fault code [CA153] Supercharger temperature sensor high voltage fault

Fault code [CA154] Boost temperature

Komatsu excavator old model code table PC (-7) model machine fault code
Doosan excavator common fault codes

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注

Close My Cart
Close Recently Viewed
Close
Close
Categories